It's December which means that Christmas is round the corner and 3 weeks of holiday parties to attend. Sounds quirky, but a Christmas themed pool party may be the coolest thing you can host this holiday season. In fact, with an indoor pool, this party could be enjoyed at anytime of the day. Besides, it’s always fun to have a reason to pull your Christmas decorations out of storage and decorate! Don't worry about the cleanliness of the pool, post party. 
  
Give your pool a festive look, make it the focal point of your party and then leave the cleaning task on your pool cleaning company in Cypress who will clean it for you in the best possible manner.

Turn your Deck Area into a Winter Wonderland

Do not forget to create a festive atmosphere around the pool by decking the pool area with seasonal decorations.

You can hang Christmas lights on the backyard’s fence or turn-on the red and green hot tub’s lighting. You can also decorate the surrounding plants with stars, snowflakes and Christmas baubles. Cover the deck area with artificial snow and mark the path to the hot tub with festive pathway markers – cardboard candy cane, gingerbread houses or even cardinal wreaths work great.

Take it up a notch by adding an inflatable snowman or Santa to your decor. You could even tie a bright red ribbon around your hot tub to make it look like the world’s best Christmas present!

Play Your Favorite Christmas Music

All of us wait for Christmas all the year long, just to break out the favorite Christmas jams. Playing your favorite Christmas music will really set the mood. You can also create a themed playlist by just looking up on your laptop and music system for your favorite songs suitable for Christmas pool party.

Make it a Fancy Dress Party

If you’re feeling particularly adventurous, it's a time to bring about a change by turning the usual Christmas hot tub party into the event of the year by making it a costume party.

So make sure that your relatives and friends deck themselves like elves, reindeer or even Santa, and in the last, wins the best dressed title. You could also hand out Santa hats, elf hats or reindeer headbands at the door.

Christmas Themed Entertainment will Add More Charm

It is always said a party can only be good if the entertainment is good. You can make your party a memorable fiesta with Christmas-themed fun and games. Get your guests into the Christmas spirit ahead of time by organizing a secret santa, and make gift-giving the highlight of your party. 

Check Out The Steps To Clean Your Pool Post Party 

1. Remove all the tins, cans, and tissue papers spread in and around the pool. All the things floating on the pool can be removed by using a vacuum head or skimmer nets. Do not leave the pool unattended due to hectic schedules in the festive season, instead, seek a help from the team of professional experts. 

2. It is highly recommended to remove all the clothes lying in and around the pool because the chlorine might cause the clothes to discolor. So it is best to book an appointment with pool cleaning company well in advance so that they come immediately and at the scheduled time, just after your party gets over. 

3. The team of professional experts will clean the pool deck area with a mop, or spray the dirt away with a pool surface pressure washer.

However, before you send out those party invites and make all suitable arrangements to make this year's Christmas a memorable one for your friends and relatives, make sure your swimming pool is in perfect condition, both before and after the party.  Book an appointment with Esposito Pools, a reliable company for pool cleaning in Cypress, for the cleaning of your pool post Christmas bash. All you have to do is simply enjoy a worry free Christmas party!

Soon the freezing temperatures will give a knock on every door in Houston and Cypress. What can you do to protect your pool equipment from freeze damage? Here are a few tips that might prove helpful to protect your swimming pool equipment during extreme cold.

Taking care of your pool doesn’t end when you put the cover on. It’s important to continue cleaning your pool & equipment during the winter season to prevent freeze damage. It would be far better, if you fix an appointment with a reliable company that offers pool cleaning in Cypress or Houston area. 

1. Go Automatic – Always ensure that the main pool pump is running continuously while the temperature is below freezing point. The pool should have a freeze protection device installed which will automatically turn on the pump when the temperature drops down to around 34 degrees Fahrenheit. The freeze protector will keep your pool running until the time the temperature rises above the freezing point. If the freeze protection device does not turn itself on automatically, it's recommended that you call for service as soon as possible, so as to get the situation rectified.

2. Keep Your Pool Clean – One needs to always make sure that their pool remains clean. If your skimmers and main drain get blocked with leaves and other debris, then the pump will not move enough water to prevent freezing. No matter its cold outside, do not forget to clean the skimmer baskets daily if the need arises. Call your reliable pool cleaning Cypress Company to get your pool cleaned properly & professionally.

3. Maintain the Proper Water Level – The water level tends to go down in extremely cold weather. If the water level gets too low, there are chances that the skimmers might run dry and cause the pump to lose prime. If this happens, then there will be no water movement through the pool equipment and the plumbing line is certain to freeze.

4. Drain the Backlash Line – Make it a regular habit to remove and drain plug or open the hose bib on the backwash line. Backlash line follows the tendency of retaining water in them. If this water is not drained on time, then backwash line can freeze and ultimately break.

5. If there is No Power Supply for a Longer Duration – In an event you lose power supply of your house for a longer duration than expected; don't forget about the pool equipment. Make sure to remove all the drain plugs from each and every piece of equipment, be it pump, heater or filter. Cover the pool equipment either with blanket or tarps. This may provide you with just enough protection to keep the equipment and plumbing from freezing.

Be sure to keep your swimming pool in great condition over the winter months to provide years of enjoyment! Before you can dive into its cool blue water in summers, you have to perform all the maintenance enlisted above during winter months. For cleaning pool to protect against cold and other regular maintenance, you must get in touch with reliable pool cleaning Cypress Company who will provide exquisite services to keep your pool in good condition for years.

“The secret to pristine pool health is regular and routine care.” Swimming pools are amazing in all the four seasons: spring, summer, fall and winter. They somehow make the person feel rejuvenated and refreshed. However, the quality of pools matter!! Keeping the pool sparkling clean is not as difficult as you might think and this is where pool cleaning Cypress Company steps in. All pools are different, and so are their maintenance needs. Unlike other service providing company which charge extra bucks and offer not-so good services, we are a reliable team of experts who will ensure that the pool stays in healthy condition for years.

Venture through the suggestions mentioned below for self-pool maintenance which can be practiced weekly or regularly:

1) Skim the Debris - One of the fastest and the easiest way to keep your pool clean is skimming the pool's surface by hand in every few days. For removing leaves, bugs and other unwanted items make use of long-handled net called a hand skimmer or leaf skimmer. Skimming increases the efficiency of the pool's circulation system and lowers the amount of chlorine that you require to add to your pool.

2) Brush the Walls and Tiles - Once in a week, make sure that the pool is vacuumed. However, isn't the only maintenance that should be taken care of. Brushing the walls and tile helps minimize the birth of algae and calcium deposits so they don't become larger problems in the future. For plaster-lined concrete pools use a stiff stainless steel brush. For tiles, don't use a hard brush as it might lead to scratching.

3) Clean the Pool Filter - There are different maintenance procedures for different kinds of pool filters. They all require periodic cleaning depending on the type of filter and how often a pool is used. This doesn't mean that you clean the filter more often than recommended as it can actually create hiccups in the filtration process. It is suggested to clean the filter only when the difference reaches 10 to 15 pounds (4.5 to 6.8 kilograms) per square inch.

4) Maintain the pH Level - The pool water should be tested regularly so as to ensure that the water is clean and healthy. The pH scale is a measurement of acidity or alkalinity that runs from 0 to 14. The pool's pH level can be checked with a testing kit. The reading between 7.2 and 7.8 is considered ideal as this range is safe for swimmers and helps sanitizers work at top efficiency. Testing the pH level of a pool is as simple as dipping a strip of paper in the water. 

5) Supercholorinate Water - Over a time span: Organic contaminants like ammonia or nitrogen develops in the pool. They in turn give rise to potent chlorine smell that many people associate with pools. To get rid of this harsh odor, it's necessary to superchlorinate the pool water so as to bring it back to normal chlorine levels. Take the services offered by pool cleaning Cypress Company to chlorinate your pool and get the best results. 

On a searing summer day, a swimming pool is a welcome respite from the heat. But before you can dive into its cool blue water, you have to perform all the maintenance drudgery that prolongs its crystal-clear perfection. For deep cleaning and regular maintenance you must get in touch with reliable pool cleaning Cypress Company to keep your pool in good condition for years.

A decorative, colored pool deck is an inviting area surrounding the pool that not only provides a functional space for sunbathing but also a perfect place for pool party and barbecuing. Over time, pool decks, whether you own a pool in Cypress or in other city, tend to look dirty due to mildew and mold growth. The black mildew grows more in areas where there is high humidity, i.e. near the pool. That’s why experts recommend that homeowners should get their pool decks deep cleaned and disinfected at least twice a year to prevent slipperiness & spread of any disease and must perform monthly cleaning to maintain the original look of their pool deck. So, here the tips to clean your pool deck area:

#Tip 1: Preparing the Pool Deck Area: Remove all of the items such as furniture, plants and water toys around the deck before starting your cleaning process. 

#Tip 2: Preparing Cleaning Material: The first step in cleaning pool deck is to produce your own effective deck cleaner. Take a large bucket and fill it with warm water and add a small amount of mild bleach or mild degreasing soap. You can also get algae killer and surface cleaner in the market for cleaning decks. After mixing the water and bleach mixture properly, apply it over the deck area using a fiber-based mop.

#Tip 3: Scrubbing & Rinsing: When you have applied the cleaning solution all over the pool deck, it's now time to scrub it thoroughly using scrub broom. This process will help you to remove dirt, mildew or grime from the deck area. For removing stubborn stains use more degreasing soap with scrub brush. After scrubbing you need to rinse off the chemicals and dirt by using pressure washer. This process ensures your deck is completely filth-free.

#Tip 4: Sealing the to Prevent Future Stains: After cleaning the deck, let it dry for sometime, then apply a saturating coat of a sealer to seal the pores and harden the deck material by using a garden sprayer. The sealer will not only provide stain resistance layer for your deck but will also prevent mildew growth by keeping mold spores & water out of the deck pores. 

Pool decks are made of different types of materials including concrete, modified cement, ceramic tile, stone, and epoxy aggregate to name a few. Depending on which type of material has been used for your deck area, you should follow the manufactures recommendation for cleaning it. For deep cleaning and disinfection you must call your reliable pool cleaning Cypress company to keep your pool & surrounding area look new forever.

Pools do not lose ¼ inches of water a day due to evaporation, no matter what the weather and climatic condition in your location is. So, if your pool is losing more than 2 inches of water in a week, this means the swimming pool is leaking. Pools must be airtight; leakage problem can deteriorate the condition of your pool quickly. Pool leak can occur through plumbing parts, fittings, or through the shells. When you detect pool leak, you must review the following things:

How to detect whether the pool is leaking?

If you want to confirm a leak, you can use these two methods to detect leakage:

1. Tape Marking Method: Mark the pool water at the skimmer using tape. Check the mark after 24 hours and see whether the level has gone down or not.

2. Bucket Method: Place a bucket filled with pool water on your pool step. Mark the level of water on both the outside and the inside of the bucket using a permanent marker pen. Check the mark 24 hours later and see if there is any difference in the level of water based on the markings.

Where exactly is the pool leaking?

• Look closely the fittings, equipment and piping areas to check if pool is leaking at the plumbing system. Leakage occurs at plumbing systems because of different reasons such as low quality pipe material, installation quality, configurations and more.

• Check the surroundings of the pool and the ground for moisture. Pool leaking also occurs due to cracked pool plaster, poor condition of liners, and worn out equalizer line.

• Check the pool liner, skimmers, pool steps, and the corners to determine the exact leakage location.

When pool leak cannot be determined by above methods?

Pool leak detection is a highly specialized work, and sometimes need professional help to detect leak & repair it. They use compressed air method wherein compressed air is used to build up pressure in the pool pipes to detect the problem area. Sometimes, they also use hi-tech machines such as geophones to listen for the leak and dig wherever necessary! A secondary leak detection of underground pipe lines is also required if plumbing system is working fine. 

Pool Leak Repair with Pool Professionals

• Once the leak is detected, pool professionals will provide you with quote for structural repairs, plumbing repairs, or other services required.

• Upon receiving approval of the repair cost, your pool company will perform the pool leak repair within few business days.

If you detect leakage in your pool, call only local licensed pool repair Houston Company in order to get the best services at best rates. Pool repair leaks are not only required to eliminate water loss but also prevent damage to undermining pool structural components.

If you see black spots growing in your pool, understand that it is a sign of the beginning of black algae (which are really blue-green algae that look black). Black algae are perhaps the hardest algae to get rid of because it has very deep roots that can grow into the side of plaster pools. They have outer protective layers that protect them from normal chlorine levels and sanitization process. They usually grow quickly in warm water on a sunny day. Regular pool cleaning often restricts the growth of algae species. Though black algae aren’t harmful, their presence can be a sign that other bacteria are present. Besides that black algae growth makes your pool look dirty. So, it’s important you must get rid of black algae with these treatment methods:

Method #1: Drain the pool and acid wash the plaster. After that pressure wash the pool, and pump out the water. Then bleach wash the pool, rinse again, and refill the pool with fresh water. Replace the filter media and any semi-porous items to avoid contaminating your cleaned pool with black algae traces.

Method #2: The key to getting rid of black algae is to brush the area hard, brush thorough to "break open" its protective slime layer in order to allow chemicals to penetrate the organism. Triple shock your pool by adding 3 pounds for every 10,000 gallons of water your pool holds. Make sure you add the shock at night and run your filter 24 hours a day until the black algae has been taken care of.

Method #3: Balance the pool chemistry to a low pH/high alkalinity condition, then brush the black algae with a steel bristled brush vigorously. After brushing the black spots, Triple Shock the pool as mentioned in the method 2.

Method #4: If your budget allows and your pool is full of black spots, you can go for replastering option. This is the most effective method to permanently get rid of black algae. Make sure you ask your pool cleaning to properly clean the pool tiles to remove the black algae spores completely. After getting your pool plastered, it’s your responsibility to properly sanitize pool floats, swim suits, brushes, nets, and cleaning equipment.

Black algae are more typically found in concrete or plaster finished pools because of their rough surfaces. Their protective slime layer makes it impervious to normal chlorine levels. They don’t have any effect on water clarity, but it makes your pool appear to look ugly. So, if your pool has started to get black spots, call your expert pool cleaning Cypress company today and get rid of them permanently.

When you decide it is time for a face lift for your swimming pool, you must ensure that you and your expert pool professional make a good use of your money to remodel your pool. The cost of a pool remodeling is more than likely, more than you’re willing to pay, unless money is not a concern. Thankfully, it is doable to make dramatic transformation to your swimming pool with small changes, without spending a fortune. Small changes will help you reap big benefits – saving money and upgrading the look of your pool.

Fire Pit

Fire pit feature has become a standard backyard pool installation. They bring a special aura to your outdoor space and make your pool side a perfect place for relaxation. Stylishly designed, fireplaces for pool side spaces come in different designs and offer many options. You can either get a fire with traditional wood burning feature or setup for natural gas or propane. The fire pit can be made of metal, concrete, natural stone, and the biggest advantage is that you can select decorative elements depending on how much you are willing to spend on it.

Underwater color changing LED Lighting

Get color-changing pool LED lights installed inside your pool, which will help you increase energy efficiency, lifetime value, quality of light, and controllability. You can easily get brightest yet energy efficient LED lights with superior lens, intensity & color effects and they can be retrofitted to virtually any type of swimming pool. A well-lit pool with interesting lighting patterns is a must-have extra for your pool that makes it even more appealing.

Pool Lighting

By adding light to your outdoor space surrounding the pool you can increase the time you and your family enjoy using it. Pool lighting, especially the deck, path leading to the pool and lighting of other special features surrounding the pool, will allow you to extend the use of your outdoor living space beyond sunset. Pool lighting is also a great way to create ambiance, set the mood for your pool party. Of course, you must use LED lights to save as much energy you can, after all, remodeling is being done to save money in the future!

Water Slides

Adding water slides to your swimming pool won’t cost you much. By integrating waterslide to pool, you get the feel of a water park in your backyard! With endless fun for children and adults too, a water slide is an ultimate addition to any pool. From a straight drop to gently curved slides, you will variety of options in modern swimming pool slides.

You can make significant transformation to your pool with these small changes. Besides major renovations such as pool plastering, tiling and resurfacing, get these modifications done by your pool remodeling Houston company and change the appearance of your pool within limited budget.

Rust stains often develop from iron/steel components of pool equipment, old water pipes carrying iron into the pool when adding water, or steel of concrete structure of the pool. Removing rust stains from surface is difficult, unless you have knowledge about staining and your pool surface. They are unsightly and are damaging to the pool surface. You must remove them and ensure that it doesn’t cause damage to pool. Follow these three rust stain removal methods while cleaning your Cypress pool.

1.Scrubbing: For minor rust stains, use a stiff bristled scrubbing brush to rub the surface where there is a stain. You can even use a steel wire brush if bristled brush proves unsuccessful. However, make sure you do not use hard brush types for more delicate surfaces as it could cause visible damage.
 
2.The Sock + Dry Acid Method: To perform this process, you need to wear protective gear. Take an old tube sock and sodium bisulfate (dry acid). You can also use ascorbic acid. Add a cup of dry acid to the sock, and tie it to keep the acid contained. Use a pool pole to hold the sock containing dry acid in place for 5-15 minutes. While doing the process, be aware that you don’t keep the sock above the stained surface for too long, as it may cause the affected surface lighter than the surrounding area.

3.Vitamin C Tablets: Vitamin C tablets are made of ascorbic acid that works well for stain cleaning. New pool rust stains can be removed by rubbing vitamin C tablet. For hard stains, crush some vitamin C tablets and sprinkle over the affected area, followed by vigorous brushing. In the market, you’ll get pool stain remover made from ascorbic acid. You can such products by adding them in a sock or pouring into a pipe for concentrated spot treatments.

In order to reduce the time and effort you spend dealing with pool stains, it is necessary to prevent it in the first place. When pH or alkalinity isn’t maintained, metals start leaching from the plumbing system into the pool and stain the surface. Always check your pool water chemistry and maintain the pH level between 7.4-7.6. Check all the pool equipment for corrosion and repair, or replace the part that is showing signs of rust. If your pool is showing recurring stains despite how many times you’ve removed them, you may probably need a pool professional to correct it. Call your Cypress pool cleaning company or pool expert in your area and get your pool staining problem fixed quickly.

Pool owners often appreciate the long lasting and durable nature as well as smooth finish of plasters. Pool plaster, when properly mixed, applied, cured and maintained – can last for more than 15 years. Plastering a pool is not a DIY task and requires a much more industrial preparation process. Sometimes, plaster jobs can fail too – there are lots of different defects that can occur with pool plaster. There are 5 common types of defects that occur with newly plastered pool in Houston. Check them out!

White spotting: This issue occasionally develops in new white and dark colored plaster pools. The unsightly white spots begin to show up within the first year after plastering, and sometimes even before that. This problem has also been given the name of “spot etching” by pool plasterers. The addition of calcium chloride to the plaster mix also contributes to porosity, shrinkage and micro-cracking. When specific areas of a plaster surface become porous, the spots become lighter in color than the surrounding plaster surface, causing white spotting.

Discolorations: Discolorations can occur in a new pool plaster due to the addition of excessive calcium chloride set accelerator. Mottled discoloration can be severe that is difficult to remove or discolorations can be in the form of “trowel burn” sanding, acid washing, or torching the surface. Discolorations are detrimental to a plaster finish and the discoloration often returns later. 

Spalling or Flaking: The term “spalling” has become a commonly used term to describe shallow surface loss. However, in the pool industry, the term “scaling” is used to describe calcium carbonate depositing from pool water onto the plaster surface. This problem usually results from hot, windy or dry days, or sometimes due to improperly timed trowel passes. When water evaporates from the pool surface faster than mix water, bleeding up occurs to replace the lost water from a particular surface. As a result, a weakened subsurface zone is created that will spall off subsequently.

Crazing or Cracking: Crazing is an excessive amount of surface shrinkage cracking. These will provide a nice foothold for dirt and algae. Crazing can result from excessive drying of the plaster before the pool is filled or from the addition of excessive water while troweling, or from excessive calcium chloride set accelerator added to the batch.

Etching: Look different from delamination and spalling, etching occurs when plaster have separated from previous plaster layers. Etching of pool plaster indicates a soft spot of plaster that has degraded and mostly occurs on steps and swimouts, & around wall fittings. It occurs when excess sand or fine aggregate is used in the plaster mix, or excess water or low cement concentrations in the mix, or due to excessively "hot" plaster mix with high calcium content.

Most new plaster finishes are flawlessly brilliant and usually don’t develop defects for years, if done & maintained properly. This post is to inform pool owners about the problems that can occur with new pool plaster, so that they can take care of their pool before and after pool plastering. An experienced pool plastering company in Houston or in your area will always avoid the mistakes that new pool companies usually do during plastering. Contact a trusted local pool plastering company and you will have no problems!

Do you have an old pool? It could be the time to replaster your pool. Although the expected lifespan of plaster applied to pool ranges from 10 to 15 years, good pool chemistry and maintenance may earn your pool plaster a few years beyond that. There are many variables that affect the longevity of your pool’s plaster. Some of these factors include how the plaster was applied and water’s chemical balance. How do you know that your pool needs replastering service now? Check out for these signs to know when you should call your Houston pool replastering professional.

Typical Signs that you Need to ReplasterYour Pool

• Mineral Stains

Pool stains don’t just happen, they are caused by poor water conditions and debris. Debris stains caused by leaves or dead bugsthat cannot be removed by simple brushing or bleaching. Similarly, minerals such as copper, iron or manganese present in fill water or coming from copper pool pipes can cause pool stains that are hard to remove by acid washing or chemical stain removers.

• Gunite/shotcrete/rebar is showing through

If you have bare spots inside the pool where the gunite/shotcrete/rebar beneath is showingthrough, this is of concern. Gunite/shotcrete forms the structural support of the pool, but they are porous and water will seep through them. The plaster acts as a waterproofing material above them. If your pool is showing patches at different areas where shotcrete/gunite beneath is clearly visible, it’s time to replaster.

• Rough Surfaces

The best indication that you may need pool replastering is identifying if the sides and bottom of the pool have become rough or not. Rough pool surfaces can cause tearing at your skin or clothes, and also provides algae a nice place to attach their roots. Localized rough surface can be sanded with rotary sanders but widespread rough surface can only be done away with replastering.

• Pool owners decide for a pool facelift

Some pool owners want to change the color or surface material of their pool, and that’s another reason for pool replastering. Generally, white plaster is applied over a shotcrete pool shell, but you can also opt for colored ones. Colored plaster is white plaster with dye added to the mix. If you’re bored with your plain white plastering, go for replastering using colored plaster option.

Knowing when to replaster your pool is essential if you want to avoid additional repairs and unwanted plastering costs. Watch out for these typical signs to determine if it’s time to replaster your pool. Once you have determined that your pool need repairing service now, you only need to do one thing – calling your professional pool replaster Houston company. Leave the plastering job to pros and enjoy your pool again once pool replastering work is done.

When a homeowner decides to build the pool that has been a longtime dream, the first thing that comes to their mind is to create a pool that mirrors their personal style. If you would like your swimming pool to reflect your unique style, you can come out of the humdrum box by incorporating major stylistic changes in your Houston pool. The following are some new pool construction ideas to consider if you are willing to venture a one-of-a-kind pool and declare your pool's uniqueness as an extension of your own individuality.

• What about custom pool shape?

Do you want your pool design to take the shape of your most treasured possession? What about a guitar-shaped pool or crescent shaped one? Virtually any pool shape is possible. Whendeciding the shape of your pool, your imagination is the only limit, the rest up to your pool construction company!

• Poolscape– Blend the Pool with Landscape

Get your pool designed and installed in a natural-setting in such a way that it seamlessly blends with the landscape. You can give a “shoreline” touch to your poolscape design by incorporating beds of gravel, water plants, and scatters of mixed stones to make the whole scene blend completely with your greeny& rocky backyard landscape. Never add features to your pool that are a stark contrast to the yard’s landscape.

• Fire pits, waterfalls,pool bridgesand custom outdoor area

Fire pits built around your swimming pool will not only add special ambiance but will also form great reflective visuals. Sitting on your pool chair near the water environment while watching the reflection of beautiful hues of flames on the water will evoke feelings of warmth and coziness that are hard to beat! Waterfalls have their own charm. By adding a little spark to your setting with a beautiful rock waterfall, you can't go wrong. A customized outdoor living area/wood trellis/wooden footbridge/gazebo will provide a cozy respite for those seeking solitude and some private relaxation time.

• The element of moving water – Laminar fountains and fountain bubblers

Fountain bubblers and laminar fountains can be used on almost any style of pool and are quite affordable. Fountain bubblers must be installed during new construction or major remodeling since they are built in the pool floor. They create jet of bubble waters for kids to play inside the shallow side of the pool. Laminar fountains create bubble-free arc of water, and often lit by stunning LEDs.
    
These amazing new pool construction ideas will result in a true work of art if every feature is thoughtfully planned and designed before construction and installation. Talk to an experienced new pool construction and pool remodeling company in Houston or in your area and spend a lot of time designing your plan with the consultant. After all, your pool is a lifetime investment.

Pool remodeling is an excellent way to give new life to your old pool. Many people remodel their swimming pool to give it an all new look, and this is definitely one of the most eminent reasons to do so. But you can do much more with a pool remodel than just enhance its look. You can do change everything from making it better energy competent, to enhancing its functionality, to making it more friendly for the kids. Learn about the many benefits of pool remodeling here!

Better Energy Competence

A great reason for a pool remodel is to make it more energy efficient. You can replace your old pool equipment with innovative, higher efficiency pump, filters and solar heaters to improve the energy efficiency of your swimming pool. Pumps now come in variable-speed models, so you can save a lot of energy by changing the speed of the pump or using higher settings for more thorough cleaning. Of the three types of filters (cartridge, D.E. and sand), cartridge filters provide the most energy efficient flow and reduce the pump's electricity use. You can save money and energy by upgrading your pool’s equipment to latest, contemporary pool equipment.

An Innovative Finish

To give a new finish to your pool is one of the primary benefits of choosing pool remodeling. Swimming pool finishes have undergone a huge transformation in the recent decade. Now there are innovative pool finishes available in the market that brings the vibrant elegance and durability of nature to your pool floor. From cutting edge aggregate pool finishes to the new generation of quality pool plaster and pool tiles, the new varieties of pool’s interior finishes are available in a wide array of styles and colors, and offer superior strength and durability. These new finishes look spectacular & impressive and add an attractive visual appeal to your swimming pool.

More Kid Friendly

Swimming in a pool may be a fun summertime activity for children, but you need to keep your pool safe for the young ones who frequent your pool. Pool remodeling is a great way to make your pool friendly for the kids as well and there are many ways to do that. You can install pool covers or barriers to your pool or reduce the depth level for safety reasons. There are many features that you can add to your existing swimming pool to transform it into an aquatic playground for your kids. Consider installing diving boards, waterfalls or cascading jets, slides when remodeling your pool. Make sure your swimming pool area is remodeled in a way that maximizes fun as well as ensures kid's safety.

As we said in the introduction, the major reason most people remodel their swimming pool is to include new features and give it an attractive look. So, if you are also planning to remodel your pool in imminent days, then you must book pool remodeling services in Houston now!  

It is important to control when your pool equipment turns off or on to facilitate your pool maintenance. You don’t have to be a mechanic for maintaining the water flow and quality in your pool; instead you can set up and operate a pool time clock to control your pool equipment adeptly.

The most commonly used pool timer for pool pumps is the intermatic time clock. With this clock, you can set your pool pump on in the early morning even when you are sleeping or just all night by adjusting it accordingly. By setting the pool time clock in non-peak hours, you can efficiently save your significant amount of time and money. Setting a pool timer is as easy as setting a clock in your home, but it requires some proper instructions to operate it efficiently. So, let’s learn the steps to operate the pool intermatic time clock proficiently.

• Pull the door of the pool intermatic time clock to open the box and look for trip switches. There will be two trip switches; first one is labeled as ON and second one is labeled as OFF.
• To set the time correctly, pull the dial of the intermatic time clock outwards or towards yourself and rotate the dial left or right until the right time is set with the help of the permanent silver bar.
• Use pliers or screwdrivers to loosen the ON and OFF switches if it is necessary and set the switches consequently; for example, OFF- 3 AM and ON -7 AM.
• Once the time is set, you can tighten the switches before closing the door of the intermatic time clock box.

If you look at the back of the time clock, you will find some gears moving in clockwise direction. These gears confirm if the time clock is working properly or not. So, during the setting up of the timer, it is advised not to touch these gears as it might obstruct the normal functioning of the intermatic time clock. Moreover, when the time is set, the door of the intermatic time clock should be closed to prevent dirt, bugs, or water from entering into it.

We must say that every pool owner should use the pool intermatic time pool to keep a check on the functioning of their pool pump system. It will not only help in saving time required in turning the pump system on and off, but will also make the pool maintenance procedure simple and easier. 

It is important to clean the pump pot baskets regularly for maintaining the overall hygiene of your swimming pool. If the pomp pot basket becomes clogged, it might put pressure on the pump to work harder for cycling the water properly. It will not only reduce the life of the pump but it will also stress the seals in your pump. 

If the basket becomes full of debris, it impedes the flow of water and you will not get the proper turnover rate to filter the pool water appropriately while filtration is a significant part of your pool maintenance. The clogging of pump pot basket will not only affect the filtering and pumping abilities of the pump system, but it will negatively affect your pool maintenance.

 
Here are simple steps that can help you check and clean your pump pot basket regularly:

• Turn off the pump of your pool to stop the water flow through the pump.

• Turn the air relieve valve on the top of pool filter in counterclockwise direction to relieve the air pressure.
 
• For opening the pump pot, turn the two knobs of the pump pot basket lid counterclockwise and rotate the knobs away from the lid.

• Once the lid is open, check the O-ring for any debris because even a grass or a hair strand can cause the lid not to seal down properly.  

• Check the pump pot basket for any debris and if you see anything, make sure to take out the basket out of the pump pot to clean it. There is an opening on one side of the basket to maintain the flow of water.
 
• Clean the debris from the bottom of the basket with a help of a garden hose.
 
• Put the basket in the pump pot properly. The pump pot basket should be placed properly with the opening facing towards the suction pipe, which is in front of the pump in inward direction. If you will place the basket with the opening on other side, then the debris will not get into the basket but goes under the basket into the impeller clogging the pump pot. 

• Lubricate the O-ring with a good lubricant so that it could seal down properly  but don’t push lot of force in closing this lid because it might cause damage to the O-ring. Once, the pump is turned on, the lid will get sealed properly due to the pressure from the back.  

If you are planning to resurface your pool or constructing a new pool at your backyard, then one of the most important decisions is what product to use for constructing the interior pool surface. Installing a new pool interior or creating a pool interior with plaster will not only give your pool a clean look, but will also make it look amazingly fresh and lucid. Although pool owners have varied pool surfacing options to choose from straight forward standard white plaster to multi colored pebbles, but still choosing pool plaster is preferred over other options due to a range of benefits associated with it.

Here is the list of benefits of pool plastering over other pool surfacing options:

 Plaster is known for longevity 

Plaster has been used as a pool surfacing option for more than 50 years. It is the oldest pool surfacing options available until this date and the credit goes to the longevity provided by this highly robust material. Experiences have proven that a pool interior with plaster can withstand well with the pool water chemistry.
 
A cost effective option 

Plaster is a very cost effective pool surfacing option because their initial cost is pretty low below than other pool interior surfacing alternatives. Moreover, the average life span of a plaster surface extends around 15-20 years that makes it one of the most affordable component of a swimming pool. It means that plastering the pool interior values for your investment. 

Easily repairable

Most of the times the interior surface of pool undergoes discoloration, damage or gets stained due to either environmental factors or manmade factors. In such cases, the plastered pool surfaces are known to sustain repairing process that can involve chemical treatments as well. However, other pool surface options don’t offer this much of tolerance during the repairmen procedures. 

Sustain improper water balance

Your pool water might lose its chemical balance due to certain reasons such as defect in chlorinator, floods or heavy storms. This chemical imbalance causes corrosion and damage of the pool interior surface. If you choose to plaster your pool interior, it can easily sustain improper water balance.
 
Ecologically sound and non-hazardous 

Pool plaster is known to be created from nature’s finest material and hence it offers a completely non-hazardous and ecologically sound pool environment. Due to its non toxic properties, it doesn’t cause any side effects to the pool water chemistry, thus making the pool water extremely safe for the pool owners. 

Easily available in varied colors

Due to its easy availability in varied colors, you don’t have to worry at all if your pool interior surface has become obsolete. You can choose pool plaster in any color of your choice to create the preferred appearance. The plaster color doesn’t give the coloring to the surface only, but constant through the entire material. Besides, there are options available for various finishing techniques that consists of exposed aggregate that let you choose from a wide variety of preferred pool appearances.
 
Having a pool at the backyard for enjoying rejuvenating moments requires proper care and maintenance of the pool components and the pool interior surface is one of the major components that requires careful selection and implementation for its maintenance. Hence, instead of other surfacing options, ensure to opt for pool plastering surfacing technique to enhance your pool’s look and longevity.