In the recent past, fiberglass pools have become popular with homeowners because they are relatively easy to install, can hold up well over the course of time, and they look spectacular. But, there exists some repair issues specific to fiberglass pools and can be problematic in the later run. 

Repair Considerations For Fiberglass Swimming Pools

If you're considering to install an inground fiberglass pool or if you already own one and thinking of remodeling it, then you might have or will come across the below mentioned common repairs associated with fiberglass pools.

LEAKS – When the fiberglass shells are shipped to their new home, it is very much necessary to add a backfill to keep the shells in place. Though sand is used normally yet this material can play havoc with plumbing. But how? If the sand around the pipes is not properly compacted, it will settle which causes pressure on pipes and eventually leads to leaks.

BULGING WALLS – Maximum of the inground pools are dug from the earth before vinyl or concrete is added to create a surface capable of holding water. The above-mentioned sand backfill issue can be a problem here too because when sand is saturated by water, it becomes liquefied and this leads to immense pressure being placed on the walls of the pool. If the fiberglass shell is not strong enough to withstand this pressure, unsightly bulges can form on the wall.

SPIDER CRACKS – In all the fiberglass products, these cracks are common and accepted. They are mere hairline cracks that appear on the surface layer, also known as the ‘gel coat’. Moreover, these cracks are not structural for they don’t extend into the structural layers of the pool and only affect the thin layer of the gel coat.

The main reason why they are known as “spider cracks” is that they branch out like the spokes of a wheel from a center so the result looks a lot like a spider’s web. Although these cracks don't cause any real issues, yet they look horrible. And after all, when you have spent thousands of dollars on a fiberglass pool, won't you expect it to look fabulous?

POOL LEAKS – A leak in a fiberglass pool can cause the pool shell to lift from the ground. Pool leaks can occur anywhere inside your pool; a leak can occur at a pipe connector under the pool deck, beneath the skimmer, on the sidewalls and a crack in the shell. Prevent problems by detecting and repairing the leaks in your pool quickly as it might get worse in the long run, causing greater damage to your pool and need costly repairs.

These are the main fiberglass pool problems along with few others. But the fiberglass pools come with many advantages too. If your swimming pool is going through all or any of the aforesaid common fiberglass pool problems, you need to contact a professional team specializing in pool repair in Houston or your local area to fix the existing issue as soon as possible to avoid further loss and damage.